MYRYAD: Z240

Myryad Z240 Stereo Amplifier

Features

High Current Amplification
British Designed and Engineered
3 Year Australia Wide Warranty

Buy Your Myryad Z240 Amplifier Online

British Manufacturer Myryad have come a long way from the humble beginnings of 2 brothers passion for quality music and affordable electronics. RIO Sound and Vision are very proud to showcase the range of the new Z Series, re-engineered now with A grade components and  metal oxide technology. For those you aspire to have affordable premium Hifi we now have your solution.
Myryad Z240 Stereo Amplifier
The new dynamic, 50 Watts per channel Z240 amplifier boasts a luxuriously thick ‘Z200’ fine-textured aluminium facia. Its white LED indicators complement the uncluttered styling to produce a sophisticated look and feel. The Z240 delivers extended, weighty and controlled bass, open and detailed mid-range, and refined top-end air and sweetness.
The Z240’s design features:
50 Watts per channel output into 8 ohms and at least 70 Watts into 4 ohms
Short, direct signal path with just a single high-speed low-loss film coupling capacitor
Six separate inputs and bi-amplifier/subwoofer output
Massive 2.2kg low-noise toroidal power transformer
“High-end” power supply includes discrete “soft recovery” ultra-fast rectifier diodes which improve dynamic range by reducing induced RF ‘noise’
Speaker terminals wired internally using the acclaimed QED ‘Silver Anniversary XT’ cable
Supplied with Myryad System Remote Control handset
Myryad “Smart My-Link®” for intelligent system operation with other Myryad products
Technical Design Features
In order to achieve the ultimate performance at such a competitive price the Z240 has been meticulously engineered. The selected line input signal is sent directly to a high quality motorized volume control and thence directly to the input of a high gain power amplifier via just a single low-loss film capacitor. This configuration ensures the shortest possible signal path and minimum degradation of the audio signal, but it needs an excellent power amplifier.
The Z240’s power amplifier, with its DC5 (*) circuit configuration easily meets this need. From its wideband complementary push-pull input stage through to the triple emitter follower output stage every detail of the power amplifier is optimally designed for its task. The power supply and power amplifier are of equal importance. The Z240 power supply uses a massive custom-designed toroidal power transformer (weighing 2.2kg), discrete “soft recovery” ultra-fast rectifier diodes and high-value reservoir capacitors (totalling 20,000µF) enabling it to deliver, via the amplifier, whatever current the loudspeaker load demands. Finally, to make absolutely certain that the sensitive parts of the amplifier are not disturbed by noise or distortion from the power supplies, each channel of the power amplifier, apart from the high current output stages, is fed from its own high-isolation regulated power supply.
The loudspeaker connectors are substantial gold-plated solid metal 5-way binding posts, wired directly to the power amplifier outputs via top quality loudspeaker cable (QED ‘Silver Anniversary XT’).
A “Bi-Amp” output is provided for driving a suitable power amplifier to build a bi-amplified system. The Bi-Amp output can also be used to drive a powered subwoofer.
The Z240 includes a low-noise phono preamplifier using close tolerance metal film resistors and polypropylene film/foil capacitors to provide precise and stable RIAA equalisation. Its sensitivity and headroom make it suitable for a wide range of Moving Magnet and “High-Output” Moving Coil cartridges. A rear panel push switch allows the phono preamp to be switched out of circuit if desired, providing a sixth line input.
* Double Complementary Cross-Coupled Cascoded Current feedback
Specifications
Continuous rated power output
(< 0.1% THD)
50W into 8W
Inputs
Tape 1, Tape 2, CD, NET, Tuner, Phono
Signal/Noise ratio
(A weighted, ref. 50W)
102dB
Input sensitivity (ref 50W)
Line inputs:
250mV
Phono input:
2.5mV
Frequency response (20Hz - 20kHz)
±0.3db
Physical Specification
Dimensions (width x height x depth)
436 x 78 x 316mm
Weight, Net.
6.9 kg
Finish
Natural Silver fascia with Silver-Grey casing or Satin Black fascia with Black casing
Warranty 3 Year Australia Wide

CUSTOMERS ALSO BOUGHT